This rack panel is 2 Rack Units in height (3.5 inches, 8.88 cm) by 19 inches wide (EIA Standard rack panel width) - also available (on special order) in 23 inch width (or any other width). If you need a custom size we can do it, please ask!
The PANEL can be mounted to the TRAY at the corners using our custom corner brackets (optional). You can order a filler plate if you don't need the second opening now but might later on (optional). You can order an optional 15, 20 or 30 Amp power supply that comes pre-mounted to the tray.
Each supply comes complete with a line cord, strain relief, and two of the bi-pin cords that mate with the power connectors on the radios - plug and play! The 15 and 20 amp supplies are the same physical size (see the photos) and are 110 volt -120 volt only. The 30 amp supply is in a larger package (see the photos) and is switchable between 110 volt - 220 volt so it works just fine on worldwide power sources. The radios slide in from the front unit just the bezel is showing. PLEASE note that you will need to drill the mounting holes for the "L" brackets to the proper location YOU prefer for placement of the depth of the radios; the tray is a generic tray; we use it for a lot of our products.
We can make you a custom (turn-key) Go-Box using your radios! Novexcomm does a lot of custom one-off manufacturing so look us up... We can make it your way!We make dual radio rack mounts for Motorola, Kenwood, Icom, Yaesu, Vertex, Alinco, Bendix-King, DIN and other manufacturers radios. If we don't have it we can make it! The CDM radios in the photos are shown for clarity and are not included. Novexcomm makes standard and custom rack mounts for any need and almost any radio.
We do rack mounts and Go-Boxes your way! Use any search engine and connect with us, 10 a. We can make panels for most anything here at Novexcomm - We have it all and if we don't we can custom make if for YOU! If you have any special needs like portable (Go-Box) or mobile operation be sure to give us a call first to discuss how we can make it work for you.
Our rack panels are made from 0.125 (1/8 inch) aluminum, have a semi-gloss (satin) black baked finish and are made in the USA! We can't afford to have a sample of every radio ever made sitting around here just for photos so many of our images are Photoshopped. Some of them aren't even of the right radio; in some cases we put a photo of a similar radio there just to give you an idea of what our rack panel will look like when you mount your radio into it. The item "2U RACK MOUNT Dual MOTOROLA CDM 750-1250-1550 Series VHF or UHF, Optional PS" is in sale since Thursday, August 23, 2018. This item is in the category "Consumer Electronics\Radio Communication\Parts & Accessories\Mounts".
The seller is "novexcomm" and is located in Torrance, California. This item can be shipped worldwide.